|
|
|
'Mid Shine' Finish Block Paving Sealant
FREE Homeowners Application Kit with Every Order of Paving Sealant
• 2 x Rollers
• Roller Pole
• Tray
• 4" Edging Brush
• Protective Gloves
Only available with orders of 25 litres or more.
Please note: We only recommend sealing your paving if it is clean from moss, weeds, dirt, stains and algae. If your surface is not in this condition and you are unable to clean it, please see the Directory of Professional Paving and Sealing Companies throughout the UK
Call 01327 831604 for FREE and friendly advice.
Using Spinseal Sealants
Spinseal sealants should only be applied in temperatures of 13°C or above.
Directions for Use
The Sealants can be applied by brush, medium-pile roller or spray. For the best results it is recommended that two coats are applied, allowing the first coat to dry for 2-4 hours at 20°C. Do not apply onto damp/wet surfaces.
Coverage guide
Approximately 1.5 to 2.5 sq metres per litre dependant on surface porosity and method of application. As a guide only, one 25 litre container will cover 40 square metres of newly cleaned block paving, that's 2 coats applied by the roller method.
Technical and Safety Information
Sealants are based on pure acrylic copolymers and other compounds suspended/ dissolved in solvent. When opening the containers or applying the sealer, extinguish all naked flames, wear solvent resistant gloves and goggles. Avoid breathing in the released vapours.
|
