Pave-Saver Invisible Chewing Gum and Stain Repellent

Pave-Saver Invisible Chewing Gum and Stain Repellent (15L)

Areas of Use
Pave-Saver can be applied to pavements, pedestrian areas, forecourts, car parks, roofs, terraces, floors, stairs - practically any high traffic masonry area which requires protection!

The Ultimate in Pavement and Floor Protection!
Due to its exceptional penetration and stain repellent properties, Pave-Saver, supplied by Spinaclean ltd, is ideally suited to the protection of a wide variety of outdoor and indoor masonry surfaces that are subjected to heavy foot traffic.
Pave-Saver protects surfaces from weathering and helps surfaces remain clean by repelling chewing gum, water, airborne dirt, acid rain, smog, industrial pollutants, oil and grease, dust and organic growth (lichens & moss).
Rain water will remove most stains as the pollutant is prevented from sticking to the substrate. Pave-Saver offers this high level of protection by effectively reducing the adhesion rate of the pollutant, whilst still enabling the underlying materials to breathe. Once treated, pressure washing/steam cleaning with Spinaclean's range of chewing gum removal machines may be required periodically.

Pave-Saver also prevents surface flaking through repeated freeze/thaw cycles. Once applied it is invisible, essentially forming part of the substrates fabric and therefore offering high resistance to abrasion

Application Guide
Surface to be treated must be free from chewing gum, dust, dirt, oil, efflorescence, mould/algae, old paint, other surface contaminants.
Clean surface thoroughly using a Spinaclean's paving cleaning machines or similar) prior to application. The substrate should be dry, with surface and ambient temperatures between 5ºC and 35ºC.
Pave-Saver can be applied by brush, roller, squeegee, back pack sprayer or low pressure spray.
Surface to be treated must be fully saturated. This will require between 1 and 3 coats applied wet on wet dependant on substrate porosity (see guide).